Skip to content

Device integrations

PM5000 series

The Schneider Electric PowerLogic PM5000 series in the Voltmasters EMS: PM51xx to PM56xx over Modbus, all on one public register list.

Our EMS supports the Schneider Electric PowerLogic PM5000 series of three-phase power meters, used for grid and sub-circuit measurement in commercial and industrial installations.

All models in the series share the same public Modbus register list, so a single integration covers the whole family: PM51xx, PM53xx, PM55xx and PM56xx.

Supported devices

  • PM5000 series: three-phase power meter with Modbus communication

Default slave ID

PM5000 meters use slave ID 1 by default. Make sure this matches the slave ID configured in our EMS, or adjust it on the meter if needed.

Set the voltage and current transformer ratios on the meter before you add it. The meter applies its own VT and CT ratios, so a meter on the medium or high voltage side already reports primary-side values and needs no extra scaling in our EMS.

What the meter reports

  • Phase and line voltages
  • Current per phase and neutral current
  • Active power per phase and total active, reactive and apparent power
  • Total power factor
  • Grid frequency
  • Cumulative imported and exported active energy

EMS functionality

With the current integration, our EMS enables:

  • Accurate measurement of grid and sub-circuit energy flows
  • Real-time monitoring of power, energy and power quality data
  • Use of the meter as a reference point for control strategies such as peak shaving and capacity management

Additional functionality may be added over time as integration capabilities evolve.