Energy meters integration
Schneider PAS600 and iEM3555 as a measurement point
Schneider Electric is a staple in industrial measurement. Voltmasters EMS reads the PAS600 and the iEM3555 for real-time measurement on the grid connection or as a submeter per installation section.
Supported devices
- PAS600
- iEM3555
Schneider PAS600 and iEM3555.
What the EMS gets out of your Schneider installation
- Real-time measurement on the grid connection as the basis for every control action
- Submetering per installation section or consumer
- Accurate data for peak shaving and injection limiting
- Reporting and cost analysis in the platform
- Mix all brands in a single metering setup
Why installers combine Schneider and Voltmasters
Reliable Schneider meters deliver the data the EMS steers on. The PAS600 and iEM3555 give accurate measurement for peak shaving, injection limiting and reporting. You deploy them on the main connection or as a submeter per consumer.
How it works
How your Schneider connects to the EMS
Voltmaster Controller in the cabinet
The industrial DIN-rail controller sits next to the installation and runs the optimisation locally, even without internet.
Connect over the local network
You connect the device following the step-by-step guide in our documentation. We assist with commissioning on your first project.
Configure and go live
The installation appears in the platform: dashboards, control and monitoring are active right away.
Other energy meters we control
All integrations →FAQ
Questions about the Schneider integration
Which Schneider meters does Voltmasters support?
The Schneider PAS600 and the iEM3555.
What does the EMS use the Schneider meters for?
For real-time measurement on the grid connection or as a submeter, as the basis for peak shaving, injection limiting and reporting.
Does this work together with hardware from another brand?
Yes, the EMS is brand-independent. A battery, PV inverter, EV chargers and meters from different manufacturers are controlled together as one optimised system.
How do I connect a Schneider meter to the EMS?
The Voltmaster Controller connects to the device over the local network. The step-by-step instructions are in our documentation, and as a certified partner we guide your first commissioning from start to finish.
Ready to make your first project pay off?
Tell us about your next installation. We will show you the platform, help you build the business case and guide you from first quote to certification.